How to make a wooden spice rack with a sliding glass cover

How to Make a Wooden Spice Rack with a Sliding Glass Cover

A wooden spice rack with a sliding glass cover is a stylish and practical addition to any kitchen. It keeps spices organized, protected from dust, and easily accessible. This guide will walk you through building one step by step.

Materials and Tools Required

Materials:

• ¾-inch hardwood plywood (for frame and shelves)
• ¼-inch hardwood plywood (for back panel)
• ¼-inch thick glass sheet (for sliding cover)
• Wood glue
• Wood screws (1 ¼-inch)
• Sandpaper (120 and 220 grit)
• Wood stain or paint
• Clear polyurethane finish
• Aluminum U-channel (for glass track)
• Small drawer handles or knobs (optional)

Tools:

• Table saw or circular saw
• Miter saw
• Router with a straight bit
• Clamps
• Drill with drill bits
• Screwdriver
• Sanding block or power sander
• Measuring tape
• Glass cutter (if cutting glass yourself)

Step-by-Step Instructions

Step 1: Design and Measurements

Before cutting your materials, decide on the size of your spice rack based on the number of spice jars you need to store. A good standard size is:

• Height: 18 inches
• Width: 12 inches
• Depth: 4 inches

Adjust these dimensions to fit your available space.

Step 2: Cutting the Wooden Pieces

1. Cut the side panels – Two pieces of ¾-inch plywood, each 18” x 4”
2. Cut the top and bottom panels – Two pieces of ¾-inch plywood, each 12” x 4”
3. Cut the shelves – Three pieces of ¾-inch plywood, each 11 ½” x 4”
4. Cut the back panel – One piece of ¼-inch plywood, 12” x 18”

Step 3: Assemble the Frame

1. Attach the top and bottom panels between the two side panels using wood glue and screws.
2. Pre-drill holes to avoid splitting the wood.
3. Secure the shelves evenly inside the frame. A good spacing option is around 5 inches between each shelf.
4. Attach the back panel with wood glue and small nails or brad nails.

Step 4: Creating the Glass Track

1. Use a router to cut a ¼-inch deep groove along the top and bottom edges of the front opening. This groove should be slightly wider than your glass thickness to allow smooth sliding.
2. Alternatively, attach an aluminum U-channel along these edges using glue or screws.

Step 5: Preparing the Glass Cover

1. Cut the glass sheet to fit inside the grooves. The width should be slightly smaller than the opening for easy movement.
2. Sand the edges of the glass with fine-grit sandpaper or a glass polishing tool for safety.
3. Attach a small knob or pull handle to one side of the glass for easier sliding.

Step 6: Sanding and Finishing

1. Sand all wooden surfaces with 120-grit sandpaper and then with 220-grit for a smooth finish.
2. Apply stain or paint and let it dry.
3. Finish with a clear polyurethane coat for durability.

Step 7: Installing the Glass Cover

1. Slide the glass into the grooves or aluminum U-channel.
2. Ensure smooth operation by testing the movement.

Final Touches

• Mount the spice rack on a wall using brackets or keyhole hangers.
• Organize your spice jars and enjoy your custom-built spice rack!

By following these steps, you’ll have a beautiful and functional wooden spice rack with a sliding glass cover, perfect for any kitchen.

For more woodworking plans, check out Teds Woodworking Course here: https://5ec0fkma1rtoqesrt51ay-tfcv.hop.clickbank.net