How to Make a Wooden Spice Jar Rack for Wall Mounting
A wooden spice jar rack is a stylish and practical addition to any kitchen, helping to organize spices while keeping them easily accessible. This step-by-step guide will walk you through the process of making a simple yet elegant wooden spice rack that can be wall-mounted for space-saving convenience.
Materials Needed:
- 1×4 wooden boards (pine, oak, or your preferred wood)
- Wood glue
- Screws or nails
- Wood filler
- Sandpaper (120 and 220 grit)
- Wood stain or paint
- Polyurethane finish
- Measuring tape
- Saw (hand saw or circular saw)
- Drill
- Screwdriver
- Clamps
- Wall anchors and screws (for mounting)
Step 1: Plan and Measure Your Rack
First, determine how many spice jars you want to store and the dimensions of the rack. Standard spice jars are around 2 inches in diameter, so plan your shelf width accordingly.
A typical spice rack can have three shelves, each around 12 to 16 inches wide and 2.5 inches deep, depending on available wall space. Ensure each shelf has enough height clearance (around 5-6 inches) to accommodate different jar sizes.
Step 2: Cut the Wood Pieces
Using your saw, cut the wooden boards into the following pieces:
- Back panel: 16” x 12” (or your preferred size)
- Shelves: Three pieces, each 16” x 2.5”
- Side supports: Two pieces, each 12” x 2.5”
- Front rails (optional, to prevent jars from falling): Three pieces, each 16” x 0.75”
Step 3: Sand and Prepare the Wood
Use 120-grit sandpaper to smooth out rough edges, then follow up with 220-grit sandpaper for a finer finish. Wipe away dust with a clean cloth before assembling.
Step 4: Assemble the Frame
- Attach the side supports to the back panel using wood glue and screws. Clamp the pieces in place while the glue dries.
- Position the shelves at even intervals and attach them using screws and wood glue.
- (Optional) Attach the front rails using nails or glue to prevent spice jars from falling.
Step 5: Fill Gaps and Sand Again
Use wood filler to cover any screw holes or gaps. Let it dry, then sand the entire rack smoothly.
Step 6: Apply Stain or Paint
Choose a wood stain or paint that matches your kitchen decor. Apply with a brush or cloth, following the wood grain. Let it dry, then seal with a polyurethane finish for durability.
Step 7: Mount the Rack on the Wall
- Locate wall studs using a stud finder or use wall anchors if mounting on drywall.
- Drill pilot holes in the back panel of the spice rack.
- Secure the rack to the wall using screws to ensure a sturdy installation.
Conclusion
Your homemade wooden spice jar rack is now ready for use! It will keep your kitchen organized while adding a custom, handcrafted touch to your space.
For more woodworking projects, check out Ted’s Woodworking Course here:
👉 Click Here to Get 16,000 Woodworking Plans