How to Make a Wooden Mobile Stand for Video Recording
Creating a wooden mobile stand for video recording is a great DIY project that enhances stability and ensures smooth video capture. A well-designed stand can help you record hands-free videos, whether for vlogging, tutorials, or video calls. In this guide, we’ll walk you through the step-by-step process of making a sturdy and functional wooden mobile stand.
Materials and Tools Required
Before starting, gather the following materials and tools:
Materials:
- A wooden plank (preferably plywood or hardwood) – around 10×6 inches
- A small wooden block (for support) – around 3×2 inches
- Wood glue or screws
- Sandpaper (120 and 220 grit)
- Wood stain or paint (optional)
Tools:
- Saw (hand saw or jigsaw)
- Drill and drill bits
- Clamps
- Ruler and pencil
- Chisel (if needed)
- File or rasp
- Screwdriver
Step 1: Measure and Mark the Wood
Start by marking the dimensions on the wooden plank. The base should be at least 6 inches wide and 4 inches deep to provide stability. For the back support, use a 10-inch long wooden piece to hold your mobile phone at an optimal viewing angle.
Step 2: Cut the Wooden Pieces
Using a saw, carefully cut along the marked lines. You should have the following pieces:
- Base Plate: 6 inches x 4 inches
- Back Support: 10 inches x 4 inches
- Phone Holder Groove: A small piece attached to the base where the phone will rest
Ensure that the edges are smooth using sandpaper or a file.
Step 3: Create the Phone Slot
- Using a chisel or a small saw, cut a groove in the phone holder piece where your mobile will sit.
- The slot should be at least 0.5 inches deep and 3 inches wide to accommodate most smartphones.
- Sand the edges to prevent scratches on your device.
Step 4: Assemble the Stand
- Attach the back support piece to the base at a slight angle (approximately 70-80 degrees) for a comfortable viewing angle.
- Secure it using wood glue or screws. If using screws, pre-drill holes to prevent splitting.
- Fix the phone holder at the front of the base so the mobile can rest securely.
Clamp the pieces together and let the glue dry completely.
Step 5: Sanding and Finishing
- Use 120-grit sandpaper to smooth out rough edges, followed by 220-grit sandpaper for a fine finish.
- Apply a wood stain, varnish, or paint for a polished look and durability.
- Let it dry completely before use.
Step 6: Test the Stand
- Place your phone in the slot and check the stability.
- Adjust the angle if needed by trimming the back support.
- If recording video, ensure the phone is positioned securely and at a comfortable height.
Optional Upgrades:
- Adjustable Tilt: Add hinges to the back support to change the angle.
- Tripod Mount: Drill a hole in the base to attach a tripod screw for extra stability.
- Cable Slot: Cut a small hole for charging cable access while recording.
By following these steps, you can easily create a durable and functional wooden mobile stand perfect for video recording.
Get more woodworking plans with Teds Woodworking Course! 👉 Click Here
Leave a Reply