How to Make a Wooden Jewelry Display Case with Velvet Lining
A wooden jewelry display case is a beautiful and functional way to showcase and protect your precious jewelry pieces. With a rich wooden frame and a soft velvet lining, it provides a luxurious touch while keeping your items safe from scratches and dust. This guide will take you through the step-by-step process of building a wooden jewelry display case with a velvet lining, from selecting materials to finishing touches.
Materials and Tools Needed
Materials:
- Wood boards (hardwood like oak, walnut, or cherry for durability)
- Velvet fabric (for the lining)
- Plywood or MDF (for the back panel)
- Glass or acrylic sheet (for the display cover)
- Wood glue
- Wood stain or paint (for finishing)
- Hinges and clasp (if you want a hinged opening case)
- Foam or padding (for a cushioned lining)
- Small nails or brads
- Sandpaper (120-220 grit)
- Screws or finishing nails
Tools:
- Saw (table saw or circular saw)
- Router (optional for decorative edges)
- Clamps
- Drill with bits
- Measuring tape and ruler
- Utility knife or fabric scissors
- Staple gun or adhesive spray
- Paintbrushes or cloth (for stain application)
Step 1: Planning and Measuring
Decide on the size of your jewelry display case. Consider:
- The number of compartments or sections you want.
- Whether it will be a tabletop or wall-mounted display.
- Whether it will have a hinged lid or a removable glass top.
Use a measuring tape to mark out the dimensions on your wood boards. A standard size for a jewelry case could be 12” x 16” with a depth of 2-3 inches, but you can adjust based on your needs.
Step 2: Cutting the Wood
- Frame and Sides: Cut four pieces of hardwood to form the outer frame of the case. These should be mitered at 45-degree angles for a seamless look.
- Back Panel: Cut a piece of plywood or MDF to fit perfectly within the frame.
- Dividers (Optional): If you want sections inside the case, cut thin wooden slats to create compartments.
Use sandpaper to smooth out all edges and surfaces before assembling.
Step 3: Assembling the Frame
- Apply wood glue along the edges of the frame pieces and join them together.
- Secure them with clamps until the glue dries.
- Reinforce the joints with small nails or screws for extra durability.
- Attach the back panel using wood glue and brad nails.
If you are making a hinged case, leave one side open to install hinges later.
Step 4: Installing the Glass or Acrylic Top
If you want a transparent cover:
- Cut a piece of glass or acrylic slightly smaller than the frame opening.
- Use small brackets or a groove cut into the frame to hold the glass securely.
- If using a hinged opening, attach hinges at the back and a small clasp at the front.
Step 5: Creating the Velvet-Lined Interior
- Cut padding foam to fit inside the jewelry display area. This adds a soft base for the jewelry.
- Cut the velvet fabric slightly larger than the foam to allow for wrapping.
- Attach the velvet using an adhesive spray or staple gun, securing it tightly on the backside.
- If creating ring slots, use thin foam pieces wrapped in velvet and glue them in parallel rows inside the case.
For dividers, wrap each slat in velvet before attaching them inside the box.
Step 6: Finishing Touches
- Staining or Painting: Apply wood stain or paint to match your decor. Use a cloth or brush for an even finish.
- Sealing: Apply a clear coat for protection.
- Attach Hinges and Clasp: If your case has a lid, attach the hinges and clasp securely.
- Polish the Glass: Clean the glass or acrylic for a clear view of your jewelry.
Final Thoughts
Your wooden jewelry display case is now ready! This handcrafted piece will beautifully showcase and protect your jewelry while adding an elegant touch to your space.
For more woodworking plans, check out Ted’s Woodworking Course here:
👉 Click Here for 16,000 Woodworking Plans