How to Make a Wooden Acoustic Guitar Stand with Padded Supports
A wooden acoustic guitar stand is a great DIY project that combines craftsmanship with functionality. A well-designed stand keeps your guitar safe, stable, and readily accessible while adding an aesthetic touch to your space. In this guide, you’ll learn how to build a sturdy wooden guitar stand with padded supports to prevent scratches and damage.
Materials and Tools Needed
Before starting, gather the necessary materials and tools:
Materials:
- Plywood or hardwood board (¾-inch thick)
- Wood glue
- Wood screws (1½-inch)
- Foam padding or felt strips (for padding)
- Spray adhesive or contact cement (for attaching padding)
- Sandpaper (120- and 220-grit)
- Wood stain or paint (optional)
- Clear polyurethane finish (for protection)
Tools:
- Jigsaw or bandsaw
- Drill with bits
- Clamps
- Measuring tape
- Pencil
- File or rasp (for smoothing edges)
- Screwdriver
Step-by-Step Instructions
Step 1: Design the Guitar Stand
- Sketch out the shape of your guitar stand on paper. The stand should have a curved base to support the guitar’s bottom and two angled arms to hold the neck.
- Use a template or measure your guitar to determine the dimensions. A typical stand is about 18 inches tall, 12 inches wide, and 14 inches deep.
- Transfer your design onto the wood board using a pencil.
Step 2: Cut Out the Pieces
- Secure the wood to a stable surface and use a jigsaw or bandsaw to cut out the stand’s main frame. You may need two identical side pieces and a base piece to connect them.
- If your design requires interlocking pieces, cut slots where necessary.
- Round the edges with a file or sandpaper to prevent sharp corners.
Step 3: Assemble the Stand
- Align the side pieces with the base.
- Apply wood glue along the joining edges.
- Secure the pieces using wood screws to reinforce the joints.
- Allow the glue to dry for several hours before moving to the next step.
Step 4: Sand and Finish
- Smooth all surfaces using 120-grit sandpaper, then switch to 220-grit for a fine finish.
- If desired, apply wood stain to enhance the natural grain.
- Once dry, apply a clear polyurethane finish to protect the wood.
Step 5: Add Padded Supports
- Cut foam padding or felt strips to fit the areas where the guitar will rest.
- Attach the padding using spray adhesive or contact cement.
- Allow the adhesive to set before using the stand.
Final Thoughts
Your DIY wooden acoustic guitar stand is now complete! This handcrafted stand not only showcases your woodworking skills but also provides a reliable and stylish way to store your guitar.
For more woodworking projects, check out Teds Woodworking Course:
👉 Click Here