How to Create a Wooden Tablet Stand with an Adjustable Angle
A wooden tablet stand is a functional and stylish accessory that enhances your device experience, whether you’re watching videos, reading, or working. Creating one with an adjustable angle adds versatility and ergonomics. This guide will walk you through a step-by-step process to craft a durable and attractive wooden tablet stand with an adjustable feature.
Materials and Tools Required
Materials:
- ¾-inch plywood or solid wood (such as oak, walnut, or pine)
- ¼-inch wooden dowels
- Wood glue
- Screws (1-inch and 1.5-inch)
- Hinges (small brass or piano hinge)
- Sandpaper (120 and 220 grit)
- Wood stain or paint (optional)
- Felt or rubber pads (for grip)
Tools:
- Circular saw or table saw
- Jigsaw (for curved cuts)
- Drill with drill bits
- Clamps
- Measuring tape
- Pencil
- Screwdriver
- Wood chisel (optional)
Step-by-Step Guide to Building the Stand
Step 1: Design and Measure Your Stand
Determine the dimensions of your stand based on the size of your tablet. A general measurement guide is:
- Base: 8-10 inches wide and 6-8 inches deep
- Back Support Panel: 8-10 inches tall
- Lip (Front Ledge): 1-1.5 inches deep to hold the tablet in place
Sketch out your design with adjustable angle features. The angle adjustment mechanism can be achieved using a hinged back panel with notches or a dowel support system.
Step 2: Cut the Wooden Pieces
- Base – Cut a rectangular piece according to your measurements.
- Back Support Panel – Cut a slightly larger rectangle for the backrest of the stand.
- Lip (Front Ledge) – Cut a strip of wood that will prevent the tablet from sliding.
- Adjustable Support Mechanism:
- Option 1: Cut a wooden piece with multiple angled slots to allow for different positions.
- Option 2: Use a wooden dowel that fits into pre-drilled holes to create multiple angles.
Use a jigsaw for any curved edges if desired.
Step 3: Assemble the Main Structure
- Attach the Front Ledge – Glue and screw the lip onto the front of the base. Ensure it’s positioned to support the bottom of the tablet without obstructing the screen.
- Attach the Hinged Back Support – Secure the back panel to the base using a small brass or piano hinge, allowing it to tilt backward.
- Install the Adjustable Support:
- Notched System: Cut a wooden strip with evenly spaced notches. Attach it to the base, allowing the back panel to rest at various angles.
- Dowel System: Drill multiple holes in the back panel and insert a dowel to act as a stopper for different angles.
Step 4: Sand and Finish
- Sand all surfaces with 120-grit sandpaper first, then smooth with 220-grit.
- Wipe off any dust and apply a wood stain or paint to match your aesthetic.
- Let the finish dry completely before assembling the final structure.
Step 5: Add Non-Slip Features
- Attach felt or rubber pads at the bottom to prevent slipping on smooth surfaces.
- Optionally, add a soft lining to the ledge to prevent scratches on the tablet.
Conclusion
With these simple steps, you can create a stylish, adjustable wooden tablet stand tailored to your needs. Whether for work, entertainment, or hands-free reading, this project adds a practical and aesthetic touch to your workspace.
For more woodworking plans and project ideas, check out Teds Woodworking Course here:
👉 https://5ec0fkma1rtoqesrt51ay-tfcv.hop.clickbank.net