How to Create a Wooden Mobile Stand with Adjustable Height
A wooden mobile stand with adjustable height is a perfect DIY project for woodworking enthusiasts. This stand not only provides a sturdy and stylish resting place for your mobile device but also offers flexibility for comfortable viewing. Whether you use it for video calls, watching videos, or reading, this stand is practical and easy to make with basic woodworking tools.
Materials and Tools Required
Before you start, gather the following materials and tools:
Materials:
- Wooden board (preferably hardwood like oak, maple, or walnut)
- Wooden dowels (for adjustability)
- Screws and bolts
- Wood glue
- Sandpaper (120 and 220 grit)
- Wood stain or paint (optional)
- Clear varnish or lacquer
Tools:
- Saw (circular saw or jigsaw)
- Drill with different drill bits
- Clamps
- Ruler or measuring tape
- Pencil for marking
- Chisel (optional)
- Screwdriver
Step 1: Design the Stand
Before cutting the wood, sketch your design on paper. The stand will have three main components:
- Base: Provides stability and support.
- Vertical support: Holds the adjustable height mechanism.
- Adjustable holder: A sliding or pivoting section that changes height.
Make sure to measure your phone’s dimensions to ensure the stand fits well.
Step 2: Cutting the Wooden Pieces
Using your saw, cut the wood into the following pieces:
- Base piece: 6” x 4” (or adjust based on your preference)
- Vertical support piece: 8” x 2”
- Adjustable holder piece: 3” x 2”
Sand all the pieces to remove rough edges.
Step 3: Drilling Holes for Adjustable Mechanism
To make the height adjustable, drill evenly spaced holes into the vertical support. These holes will allow you to insert a wooden dowel or locking pin to adjust the height.
- Mark the points where the holes will be drilled (around 1 inch apart).
- Use a drill bit that matches the diameter of your wooden dowel.
- Ensure the holes are aligned properly for smooth adjustment.
Step 4: Creating the Adjustable Holder
- Drill a matching hole in the adjustable holder where the dowel will pass through.
- If you want a more advanced height adjustment, you can use a bolt and wingnut mechanism for tightening at different levels.
Step 5: Assembling the Stand
- Attach the vertical support to the base using screws and wood glue for stability.
- Insert the dowel through the holes of the vertical support and the holder to make it adjustable.
- If using a bolt mechanism, tighten the wingnut to hold the phone at the desired height.
Step 6: Sanding and Finishing
- Use fine sandpaper (220 grit) to smooth all surfaces.
- Apply wood stain or paint based on your preference.
- Finish with a clear varnish or lacquer for durability.
Step 7: Testing and Adjustments
Place your phone on the stand and adjust the height to ensure stability. If necessary, make adjustments to the dowel or screw mechanism for a smoother experience.
Final Thoughts
This DIY wooden mobile stand with adjustable height is a functional and stylish addition to your workspace or bedside table. By following these steps, you can create a custom stand that suits your needs while improving your woodworking skills.
For more woodworking projects, check out Ted’s Woodworking Course here: https://5ec0fkma1rtoqesrt51ay-tfcv.hop.clickbank.net.