How to Create a Wooden Cake Stand with a Spinning Base
A wooden cake stand with a spinning base is a perfect addition to any baker’s toolkit, allowing for effortless decorating and elegant presentation. Whether you’re a woodworking enthusiast or a DIYer looking for a weekend project, crafting your own cake stand is both rewarding and functional. This guide will walk you through the process step by step.
Materials and Tools Needed
Materials:
- Wood for the base and top: A 12-14 inch round wood piece for the top and a 6-8 inch round for the base (birch, maple, or oak work well).
- Lazy Susan bearing: A metal or plastic turntable mechanism (6-8 inches in diameter).
- Wooden dowel or pedestal: A sturdy 4-6 inch wooden block or dowel for height.
- Wood screws: For securing the base.
- Wood glue: Strong adhesive to reinforce the structure.
- Sandpaper (120, 220, 320 grit): For a smooth finish.
- Food-safe wood stain or finish: To protect the surface.
Tools:
- Jigsaw or circular saw (if cutting your own wood rounds).
- Drill and drill bits (for securing screws).
- Clamps (to hold the pieces while gluing).
- Wood file or router (for finishing the edges).
- Paintbrush or rag (for applying the finish).
Step-by-Step Guide
Step 1: Preparing the Wood Pieces
- Cut the Top and Base: If you are not using pre-cut wooden rounds, use a jigsaw or circular saw to cut a 12-14 inch round piece for the top and a 6-8 inch round for the base.
- Smooth the Edges: Sand all edges with 120-grit sandpaper, followed by 220-grit to remove rough surfaces. If desired, use a router to create a decorative edge.
Step 2: Attaching the Pedestal
- Position the Wooden Dowel or Pedestal: Center the pedestal on the underside of the top round piece and mark where it will be attached.
- Pre-Drill Holes: To prevent splitting, drill pilot holes in both the pedestal and the underside of the top.
- Attach with Screws and Glue: Apply wood glue to the pedestal base, align it with the pre-drilled holes, and secure it with wood screws. Wipe off excess glue.
Step 3: Installing the Spinning Mechanism
- Align the Lazy Susan Bearing: Center the Lazy Susan bearing on the bottom of the pedestal.
- Secure the Bearing to the Base: Pre-drill holes and attach the bearing to the pedestal using screws.
- Attach the Base to the Bearing: Secure the base round piece to the other side of the Lazy Susan bearing, ensuring free movement.
Step 4: Sanding and Finishing
- Final Sanding: Use 320-grit sandpaper to smooth out any rough edges.
- Apply a Food-Safe Finish: Use a food-safe wood stain, mineral oil, or polyurethane. Apply with a brush or cloth, and allow it to dry completely.
Final Thoughts
Your handcrafted wooden cake stand with a spinning base is now ready for use! Whether for cake decorating or serving, this stand will add a touch of elegance and functionality to your kitchen.
For more woodworking projects, check out Teds Woodworking Course here: https://5ec0fkma1rtoqesrt51ay-tfcv.hop.clickbank.net