How to Build a Wooden Dartboard Cabinet with Storage
A wooden dartboard cabinet is a stylish and functional addition to any game room, providing a dedicated space for your dartboard while offering storage for darts, scoreboards, and accessories. This step-by-step guide will walk you through building a DIY wooden dartboard cabinet with storage.
Materials and Tools Needed
Materials:
- ¾-inch plywood (for the cabinet body and doors)
- 1×4 wooden boards (for trim and support)
- Hinges (two per door)
- Magnetic catches or latches
- Wood screws
- Wood glue
- Sandpaper (120 and 220 grit)
- Stain or paint
- Polyurethane finish
- Handle pulls (optional)
- Dartboard
Tools:
- Circular saw or table saw
- Drill with bits
- Jigsaw (for cutting the dartboard circle if needed)
- Tape measure
- Clamps
- Wood filler
- Paintbrush or rag (for stain application)
- Screwdriver
- Ruler and pencil
Step 1: Planning and Measuring
Decide on the dimensions of your dartboard cabinet. A standard dartboard is about 18 inches in diameter, so the interior cabinet should be large enough to accommodate it.
Suggested cabinet dimensions:
- Width: 24-30 inches
- Height: 30 inches
- Depth: 4-6 inches
Consider extra storage space for darts, scoreboards, and accessories.
Step 2: Cutting the Wood
Using a circular saw or table saw, cut the plywood according to your planned dimensions:
- Back panel: 24″ x 30″
- Side panels (2): 4″ x 30″
- Top and bottom panels: 4″ x 24″
- Doors (2): 12″ x 30″ (or adjust to fit)
If you want a decorative touch, you can cut an arch or curved top on the doors with a jigsaw.
Step 3: Assembling the Cabinet
- Attach the side panels to the back panel using wood glue and screws. Clamp and let it dry.
- Fix the top and bottom panels to the sides, securing them with screws.
- Sand all edges smoothly for a professional finish.
Step 4: Installing Storage Compartments
- Cut small plywood dividers or shelves inside the cabinet for darts, chalk, or markers.
- Attach with wood glue and small screws.
- For extra organization, install small wooden pegs or elastic bands inside the doors to hold dart sets.
Step 5: Attaching the Doors
- Position the hinges on the doors and screw them into place.
- Attach the other side of the hinges to the cabinet frame.
- Use magnetic catches or latches to keep the doors closed securely.
- Attach handle pulls if desired.
Step 6: Finishing Touches
- Fill any gaps or screw holes with wood filler.
- Sand the entire cabinet with 120-grit sandpaper, then smooth with 220-grit sandpaper.
- Apply a stain or paint of your choice. Let it dry.
- Seal with polyurethane for durability.
Step 7: Mounting the Dartboard
- Locate the center of the cabinet and mark it.
- Install a mounting bracket (most dartboards include one).
- Secure the dartboard so the bullseye is 5 feet 8 inches from the floor when mounted.
Step 8: Installing the Cabinet on the Wall
- Mark the desired height on the wall.
- Secure the cabinet with wall anchors or studs to ensure stability.
- Check for level alignment before finalizing installation.
Conclusion
By following these steps, you’ll have a stylish and functional wooden dartboard cabinet with built-in storage. This project not only enhances your game room but also keeps your darts and accessories neatly organized.
If you’re looking for more woodworking plans and ideas, check out Teds Woodworking Course for expert guidance:
Click Here to Access Teds Woodworking Plans