How to build a wooden coat hanger stand with umbrella storage

How to Build a Wooden Coat Hanger Stand with Umbrella Storage

A wooden coat hanger stand with umbrella storage is a functional and stylish addition to any entryway or office. This DIY project is perfect for woodworking enthusiasts of all skill levels. With the right materials, tools, and step-by-step instructions, you can create a sturdy and elegant coat rack with built-in umbrella storage.

Materials and Tools Required

Materials:

• Hardwood (oak, maple, or pine) for durability
• Wood dowels (for hooks)
• Plywood (for base support)
• Wood screws
• Wood glue
• Sandpaper (120-220 grit)
• Wood stain or paint
• Varnish or polyurethane
• Metal or plastic drip tray (for umbrella storage)

Tools:

• Saw (circular saw, jigsaw, or handsaw)
• Drill and drill bits
• Screwdriver
• Clamps
• Measuring tape
• Pencil and ruler
• Wood chisel
• Router (optional for decorative edges)

Step 1: Design and Measurements

Decide on the overall height and width of your coat hanger stand. A standard coat rack stands about 5-6 feet tall, with an umbrella storage area at the bottom.

Recommended Dimensions:

• Height: 70 inches
• Base width: 18-24 inches
• Pole diameter: 2-3 inches
• Umbrella storage height: 12 inches

Draw a rough sketch of your stand, including the placement of hooks and the umbrella storage compartment.

Step 2: Cutting the Wood

1. Cut the main post – Use a 2-3 inch thick wooden pole or cut a solid wood piece into a square post. This will be the central support for the coat rack.
2. Prepare the base – Cut a square or circular base (18-24 inches in diameter) from a thick plywood sheet or hardwood. Ensure it is heavy enough to support the stand without tipping over.
3. Create the umbrella storage compartment – Cut four wooden slats (about 12 inches tall) and attach them in a rectangular or circular shape at the bottom of the main post.
4. Cut dowels for hooks – Cut 6-8 wooden dowels (about 6 inches long) for coat hooks. You can also use pre-made wooden pegs.

Step 3: Assembling the Base and Post

1. Attach the base – Drill a pilot hole in the center of the base and insert a long screw to secure the post. Use wood glue for extra strength.
2. Reinforce with support blocks – Cut small wooden blocks and attach them at the base of the post for additional stability.
3. Sand the edges – Use 120-220 grit sandpaper to smooth out all rough edges.

Step 4: Installing the Hooks

1. Mark hook positions – Measure and mark evenly spaced points around the post. Leave enough space between each hook to accommodate coats.
2. Drill pilot holes – Use a drill to create holes for the wooden dowels or pre-made hooks.
3. Insert and secure hooks – Apply wood glue to the ends of the dowels and insert them into the holes. Let them dry for a few hours.

Step 5: Building the Umbrella Storage

1. Attach the side panels – Secure the four wooden slats around the bottom of the stand using screws and wood glue. Leave small gaps between them for ventilation.
2. Install a drip tray – Place a metal or plastic tray at the bottom of the compartment to catch water from wet umbrellas.

Step 6: Finishing Touches

1. Sand the entire structure – Ensure all edges are smooth to prevent splinters.
2. Apply wood stain or paint – Choose a finish that matches your home decor. Let it dry completely.
3. Seal with polyurethane or varnish – This protects the wood and enhances durability.

Final Thoughts

Your DIY wooden coat hanger stand with umbrella storage is now ready to use! This project is not only practical but also adds a touch of elegance to your home. You can customize the design further by adding decorative elements, carving patterns, or even attaching small shelves for extra storage.

For more woodworking projects, check out Teds Woodworking Course here:
👉 https://5ec0fkma1rtoqesrt51ay-tfcv.hop.clickbank.net