How to build a wooden bathroom storage tower

How to Build a Wooden Bathroom Storage Tower: A Step-by-Step Guide

A wooden bathroom storage tower is a great way to add extra storage and organization to your bathroom while maintaining a rustic or modern aesthetic. This guide will walk you through building a simple yet functional storage tower with shelves to hold toiletries, towels, and other essentials.

Materials and Tools Needed

Materials:

• ¾-inch plywood or solid wood boards (for the frame and shelves)
• 1×2-inch wood strips (for trim and additional support)
• Wood screws (1 ¼-inch)
• Wood glue
• Sandpaper (120 and 220 grit)
• Wood stain or paint (optional)
• Clear polyurethane sealant (for protection)
• Hinges and handles (if adding cabinet doors)

Tools:

• Tape measure
• Circular saw or table saw
• Drill and bits
• Clamps
• Wood filler
• Level
• Paintbrushes or rags (for stain/paint application)

Step-by-Step Instructions

Step 1: Measure and Plan the Storage Tower

Before cutting any wood, determine the ideal height, width, and depth of your storage tower based on your bathroom space. A standard size is around 72 inches high, 16 inches wide, and 12 inches deep, but you can adjust as needed.

Basic Structure:

• Side panels: Two boards (72” x 12”)
• Top and bottom panels: Two boards (16” x 12”)
• Shelves: Four to five boards (16” x 12”)
• Back panel: Thin plywood sheet (72” x 16”)

Step 2: Cut the Wood Pieces

Using a circular saw or table saw, carefully cut your wood pieces according to your planned dimensions. Sand each piece to smooth out rough edges.

Step 3: Assemble the Frame

1. Attach the top and bottom panels to the side panels using wood glue and 1 ¼-inch screws.
2. Secure the joints with clamps and check for squareness with a level.
3. If desired, add 1×2-inch strips to the front edges of the side panels for extra durability and a more polished look.

Step 4: Install the Shelves

1. Decide on the shelf spacing based on your storage needs. A good starting point is around 15 inches apart between shelves.
2. Mark and pre-drill holes on the side panels.
3. Attach the shelves using wood glue and screws. Ensure each shelf is level before securing it.

Step 5: Attach the Back Panel

Secure the thin plywood back panel to the frame using nails or screws. This will add structural stability to the tower.

Step 6: Sand and Finish

1. Use 120-grit sandpaper to smooth the entire structure.
2. Fill any screw holes with wood filler, then sand again with 220-grit sandpaper.
3. Apply wood stain or paint in your chosen color and let it dry.
4. Seal with a clear polyurethane coat for moisture resistance.

Step 7 (Optional): Add Cabinet Doors or Baskets

• If you prefer a closed storage section, install cabinet doors using hinges.
• Alternatively, use decorative baskets on the shelves for a neat and stylish look.

Final Thoughts

Your DIY wooden bathroom storage tower is now complete! This project is a cost-effective way to enhance bathroom organization while showcasing your woodworking skills.

For more woodworking plans, check out Ted’s Woodworking Course here:
👉 https://5ec0fkma1rtoqesrt51ay-tfcv.hop.clickbank.net