Creating a wooden TV stand with a swiveling mount requires some woodworking skills, patience, and a variety of tools. This project will allow you to build a functional piece of furniture that holds your TV securely while allowing it to swivel for better viewing angles. Here’s a step-by-step guide to help you build a wooden TV stand with a swiveling mount.
Materials and Tools Needed:
Materials:
- Wood: Hardwood like oak, maple, or plywood for the main structure of the stand.
- Swiveling TV mount: Make sure the mount fits your TV size and has a swivel feature.
- Screws: For assembling the stand and securing the mount.
- Wood glue: For additional hold.
- Wood finish: To protect the wood and give it a polished look.
Tools:
- Circular saw or table saw: To cut the wood to size.
- Drill and drill bits: For pilot holes and mounting screws.
- Screwdriver: For assembling the pieces and attaching the mount.
- Wood clamps: To hold pieces together while drying or assembling.
- Measuring tape and square: For precise measurements and angles.
- Sandpaper or a power sander: To smooth the wood surfaces.
- Paintbrush or rag: For applying finish.
Step-by-Step Instructions:
1. Design Your TV Stand
- First, decide on the dimensions of your TV stand. Make sure it’s wide enough to accommodate your TV and any other equipment you want to store. A good starting point is to make the stand about 2 feet in height and 4-5 feet in width, but adjust based on your specific needs.
- Sketch the design, including the location of the swiveling mount and any storage spaces you want (for electronics, DVDs, gaming consoles, etc.).
2. Cut the Wood Pieces
- Using your design, measure and cut the wood for the top, sides, bottom, and shelves of the stand.
- The top should be large enough to support your TV and provide stability, while the sides should be tall enough to hide any cables and components.
- Cut pieces for shelves if you plan to add them to your design.
3. Assemble the Frame
- Start by assembling the base and frame of the TV stand. Use wood glue and screws to attach the side pieces to the top and bottom pieces, ensuring everything is square.
- If your design includes shelves, you can install them at this stage by securing the shelf supports inside the frame. Make sure the shelves are level before attaching them.
4. Install the Swiveling Mount
- Measure and mark the location on the back panel where you want to install the swiveling TV mount.
- Follow the manufacturer’s instructions for your specific swiveling mount to attach it securely to the wooden frame. Typically, this involves drilling holes and using screws to secure the mount to the wood.
- Make sure the mount is firmly attached to prevent the TV from falling.
5. Finish the Wood Stand
- Sand all the edges and surfaces to ensure they are smooth and free of splinters.
- Apply a wood finish (such as stain, lacquer, or paint) to protect the wood and enhance its appearance. Let the finish dry thoroughly according to the manufacturer’s instructions.
6. Mount the TV on the Stand
- Once the stand is complete and the finish has dried, it’s time to mount the TV.
- Attach the swiveling mount to the back of the TV according to the mount’s instructions.
- Carefully lift the TV and attach the mount to the TV stand’s swiveling mechanism, ensuring that the TV is stable and can swivel smoothly.
7. Final Adjustments
- After mounting the TV, check if it swivels freely and is securely in place. Tighten any screws or bolts if necessary to ensure everything is secure.
- Hide cables behind the stand if desired, using cable management solutions like cable ties or a cable management box.
Tips:
- If you’re new to woodworking, you might want to choose plywood for the base and frame, as it’s easier to work with than hardwood.
- Make sure the swiveling mount is rated for the weight and size of your TV.
- Consider adding a backing panel for additional support and to hide cables.
- Use clamps when gluing pieces together to avoid movement and ensure a strong bond.
Building your own wooden TV stand with a swiveling mount not only provides you with a customized piece of furniture but also lets you create a practical and sturdy solution for your TV viewing needs.
For more woodworking projects, check out Teds Woodworking Course here: https://5ec0fkma1rtoqesrt51ay-tfcv.hop.clickbank.net.