Creating a wooden phone stand with an amplifier is a fun DIY project that not only provides a functional stand but also boosts your phone’s sound quality. Here’s a step-by-step guide on how to create one:
Materials Needed:
- Wooden board (for the stand, typically 1/2″ or 3/4″ thick)
- Wood glue or wood screws
- Saw (circular or hand saw)
- Sandpaper (medium and fine grit)
- Drill with various bit sizes
- Ruler or measuring tape
- Pencil
- Wood finish (optional, for finishing touches)
For the amplifier:
- PVC pipe or a wooden tube (for creating the sound chamber)
- Hot glue or wood glue
- Phone stand template (optional but helpful for design)
Instructions:
1. Design the Stand
- Decide on the size of the phone stand. Measure the width of your phone and add extra space for the amplifier.
- The stand should have a slot for your phone and a separate chamber for the amplifier tube.
A simple design would include a base with a phone slot (at a slight incline for better visibility), and a sound chamber at the back.
2. Cutting the Wood
- Use a saw to cut the wood for the base. You’ll need:
- A rectangular base (the size will depend on your phone).
- A piece that will act as the back support for the phone (this should be slanted).
- A piece for the amplifier tube’s stand (this piece will house the sound amplifier chamber).
3. Assembling the Stand
- Attach the slanted back piece to the base using wood glue or screws. Make sure the angle is such that your phone will be stable when placed on the stand.
- Attach any side supports if needed to keep the phone in place.
4. Making the Sound Amplifier
- The key to the amplifier is the sound chamber. You can use a PVC pipe or wooden tube that fits your phone’s speaker.
- Cut the tube to the desired length. A longer tube may amplify sound better.
- Drill holes in the back of the wooden base for the tube to fit through. These holes should be large enough to allow the tube to be inserted snugly.
- Attach the tube to the back of the base using wood glue or hot glue.
5. Smoothing the Edges
- Sand all the edges of the wooden pieces to avoid splinters and create a smooth finish. Start with medium grit sandpaper and finish with a finer grit.
6. Finishing Touches
- Apply a wood finish or stain if you want a polished look. Make sure to let the finish dry completely before using it.
- Ensure the tube’s opening faces upward so the phone’s sound can be channeled through the tube.
7. Test the Amplifier
- Place your phone in the stand with the speaker aligned to the tube. Play some music or a sound, and you should notice an amplification effect as the sound travels through the tube.
8. Final Adjustments
- If you find the sound isn’t loud enough, try experimenting with the length or diameter of the amplifier tube. You can also adjust the angle of the phone to see if it helps the sound project better.
Additional Tips:
- You can also add rubber feet to the bottom of the stand to prevent slipping and protect your surfaces.
- For a more refined look, you could add decorative elements, such as carved designs or inlays.
Enjoy your wooden phone stand with an amplifier!