Creating a wooden corner TV stand with hidden storage is a great DIY project that combines functionality with aesthetics. Here’s a step-by-step guide to help you build one:
Materials & Tools Needed:
Materials:
- Plywood (¾ inch thick) – for main panels
- Solid wood (optional) – for framing and trim
- Wood screws (1 ¼ inch and 2 inches)
- Wood glue
- Hinges – for hidden storage doors
- Drawer slides (optional) – if adding pull-out storage
- Wood stain or paint
- Polyurethane (for finish)
- Handles or push-to-open hardware (for hidden doors)
Tools:
- Circular saw or table saw
- Jigsaw (for angled cuts)
- Drill & screwdriver
- Clamps
- Measuring tape
- Sander or sandpaper
- Wood filler (optional)
Step-by-Step Instructions:
1. Plan & Measure the Space
- Measure the corner dimensions where the TV stand will sit.
- Decide on the height, width, and depth of the stand.
- Sketch a blueprint or use woodworking software to finalize the design.
2. Cut the Wood Pieces
- Top Panel: Cut a triangular or trapezoidal piece to fit the corner.
- Bottom Panel: Same shape as the top panel.
- Side Panels: Two angled panels that fit against the wall.
- Front Panel: This can be solid or include doors/drawers.
- Back Panel: Optional if you want an open back for cables.
- Shelves (Optional): If adding open shelving above the storage.
3. Assemble the Frame
- Attach side panels to the bottom panel using wood glue and screws.
- Secure the top panel on top, making sure everything is square.
- If adding open shelving, install a middle shelf at the desired height.
4. Create the Hidden Storage
Option 1: Drop-Down Hidden Compartment
- Cut out a rectangular section in the front panel.
- Attach it with concealed hinges so it folds down.
Option 2: Sliding Panel
- Use drawer slides to create a pull-out storage compartment behind a false panel.
Option 3: Push-to-Open Doors
- Install push-to-open hinges to keep storage hidden without handles.
5. Sand & Finish
- Sand all surfaces smooth.
- Apply wood stain or paint for your desired look.
- Seal with polyurethane for durability.
6. Final Assembly & Placement
- Attach the doors or hidden panels.
- Secure any extra hardware.
- Move the stand into the corner and test the storage mechanisms.
Customization Ideas:
- Add LED lighting inside the hidden compartment.
- Use a barn door style sliding front panel.
- Add cable management holes for clean wiring.
Would you like a 3D model or detailed woodworking plans to follow?