How to make a wooden jewelry hanger for necklaces and bracelets

Making a wooden jewelry hanger for necklaces and bracelets is a fun and practical DIY project. Here’s how you can do it:

Materials Needed:

• Wooden board (size of your choice, e.g., 12” x 4”)
• Sandpaper (medium and fine grit)
• Wood stain or paint (optional)
• Paintbrush or rag (for stain)
• Screw-in hooks or small knobs
• Measuring tape and pencil
• Drill (if using knobs)
• Wall-mounting hardware (e.g., sawtooth hangers, D-rings, or command strips)

Instructions:

1. Prepare the Wood

   • Sand the wooden board to smooth out any rough edges.
   • Wipe off dust with a cloth.

2. Stain or Paint (Optional)

   • Apply wood stain for a natural look or paint for a colorful touch.
   • Let it dry completely before moving to the next step.

3. Mark Hook/Knob Positions

   • Use a pencil and measuring tape to evenly space out where the hooks or knobs will go.
   • Leave enough space between them to prevent tangling.

4. Attach Hooks or Knobs

   • Screw in hooks by hand or with pliers.
   • If using knobs, drill small pilot holes before attaching them with screws.

5. Mount the Jewelry Hanger

   • Attach sawtooth hangers or D-rings to the back.
   • Alternatively, use strong adhesive strips for a no-drill option.

6. Hang and Organize

   • Mount it on the wall and start hanging your necklaces and bracelets!

Would you like any design ideas or modifications? 😊